Overview
Every measurement you draw in Edit Takeoff is only as accurate as the sheet's scale. KonstructIQ calculates the scale automatically when you upload plans and shows it under each sheet thumbnail — for example 1/8" = 1'-0". If the scale is wrong, or a sheet has several scales on it, you can set it yourself.
Where to find it: project Scope tab → Edit Takeoff → click the scale under a sheet thumbnail.
Step 1: Open Set Scale for a sheet
On the project's Scope tab, click Edit Takeoff.
In the column of sheet thumbnails, find the sheet you want to change.
Click the scale shown under the thumbnail. The Set Scale window opens, titled with the sheet number — for example Set Scale — A001.
Tip: the Takeoff Assistant can also set scales for you. You review the change before it's applied. See Using the Takeoff Tool.
Step 2: Choose how to set the scale
In the Set Scale window, use one of three methods:
Drawing scale — pick a standard scale from the dropdown. The list starts with Architectural scales such as 1/4" = 1'-0" and 1/8" = 1'-0".
Calibrate with Two Points — click two points on a dimension you know from the drawing, then enter the real distance between them. Use this when the printed scale is missing or the plans were resized.
Custom Scale — type your own ratio, such as 0.25 in = 1 ft, and choose the units on each side.
Step 3: Apply the scale
To use the same scale on every page in the plan set, check Apply to all sheets in this set. Leave it unchecked to change only the current sheet.
Click Apply. Shapes you already measured on that sheet are measured again with the new scale, and quantities update everywhere, including linked scope lines.
Tip: check the scale before you start drawing. Changing it afterward works, but you will want to re-check the quantities that moved.
Sheets with more than one scale
Some sheets hold several drawings (viewports) printed at different scales — a floor plan next to a detail, for example. When a sheet has more than one scale, an orange notification appears under its page thumbnail. Hover over it to see the scales KonstructIQ found on that page.
To set them, click the scale under the thumbnail, the same as in Step 1. On a sheet with several viewports, the Set Scale window lets you set a different scale for each viewport. On a sheet with one viewport, or none, you see the standard window described above.
Note: automatic measuring does not run on a multi-scale sheet until you define its scales. Set the scale for each viewport first.
Troubleshooting & FAQs
What is the orange notification under a page thumbnail? It means the sheet has more than one scale. Hover over it to see the details, then click the scale under the thumbnail and set each viewport.
Automatic measuring isn't running on one of my sheets. If the sheet has the orange notification, define its scales first. Click the scale under the thumbnail and set a scale for each viewport.
I can't find the multi-scale option in my account. It only appears on sheets that contain more than one scale. On a sheet with one scale, the standard Set Scale window opens instead.
Does KonstructIQ set the scale for me? Yes. The scale is calculated automatically when you upload plans. Override it with Set Scale if it looks wrong.
Will my existing measurements change if I change the scale? Yes. Shapes on the sheet are measured again with the new scale, and quantities update everywhere, including linked scope lines.
Can I use the same scale for the whole plan set? Yes. Check Apply to all sheets in this set before you click Apply.
Quick Reference
Path: project Scope tab → Edit Takeoff → click the scale under a sheet thumbnail → choose a method → Apply.
Methods: Drawing scale, Calibrate with Two Points, Custom Scale.
Don't skip: the orange notification under a thumbnail. Until its scales are set, automatic measuring waits on that sheet.
